It’s been quiet here at the winery the past week.We had our first snow and the temps have been in the 20’s and even down to the ‘teens at night. Mostly we have been prepping for the Holiday Season, repairing and hanging lights, bottling wine, and sprucing everything up. We’re also hosting a Gingerbread House Competition at our culinary school and restaurant, Pairings, and lots of folks have been taking classes and coming by to work on their cakey homes.

I’m in NYC visiting family all week and going around meeting up with all my mixologist friends. It will take me all week to catch up on what’s going on the the cocktail world. I missed all the fall cocktails and hope to try a few before the winter ones come onto all the menus. With luck I may still be able to sample the fall creations.

I have a few bottles of wine from the winery for family, and a few bottles of our new hard cider for friends and the bar crew at a few of my favorite cocktail bars. I’m looking forward to seeing everyone’s reactions. I’ve also been planning a reunion with friends from back as far as elementary school and the neighborhood where I grew up, as well as friends from college and my early 20’s. It should be an evening of carousing and good, loud, fun; as we catch up on the latest. One friend of mine who I have known since 5th grade is a Lt. Colonel in the Army Reserve and has been called back to active duty for his third tour of duty. So we are going to give him a wet and wild send off as well. I hope everyone had a fantastic Thanksgiving, and have a fun weekend!

Over the weekend we finished installing new steam pipes and condensate returns for the brewery boiler. Late Saturday afternoon we fired the boiler up and it seemed to work fine. When we got in Monday to check on things, the sight glass on the brew kettle was broken. We think it probably had the wrong gaskets or some other small problem and cracked during the cool-down. We ordered a replacement, and some valves, and then we’re set to start brewing.

Later Monday we got our first shipment of brewing ingredients: crushed malt, hops, yeast, and assorted adjuncts and fermentation nutrients. So as soon as we clear up the last little things we will be brewing beer!

Much of the rest of the week was spent in the winery, bottling wine, re-arranging storage, and all kinds of things to get ready for our busiest time of year, the Holiday Season. Later in the week we found out that we still had some major problems with the boiler. Actually, not the boiler, but the configuration of the piping, where and how parts are located, steam condensate traps, pumps, etc. An expert came in and very soon was able to figure out the problems and we ordered some more parts and started what we hope will be our final re-design. Just another week or so and we’ll be able to brew.

This week went by very quickly, even though it was a six day week for me. On Monday I went in to the winery even though we were closed, so i could do some paperwork and research. The boiler guys showed up as well, to do some more work. They had to re-do a section of pipe work near the boiler where they hadn’t tightened down the pipes enough and there were steam leaks. Tuesday we were closed as well for Veterans Day, but I was back again, doing more research and paperwork. I had the place to myself for most of the day and it was nice and quiet.

On Wednesday, just before lunch time, the delivery of 6,000 pounds of peach puree arrived. Twelve drums, each weighing 500 pounds, stacked four to a pallet. As the first pallet load was being lowered on the gate lift to the ground, it started teetering, and almost fell. But made it semi-safely to the ground. The second load got out of control and came crashing down onto the asphalt of the parking lot. As you can see they were torn open, dented and partially crushed like soda cans. Luckily, the puree is packed aseptically inside very thick Mylar bags that have a breaking strength in the thousands of pounds. So with a huge struggle we were able to right the drums and manhandle them down into the winery. It took us almost two hours to get the twelve drums down the ramp and into the basement. Leaving us sore and aching in every joint.

Then on Thursday the boiler guys came to correct some other minor problems, and we powered up the boiler. Everything seemed fine, except for the cloud of smoke wafting along the ceiling. As the steam pipes heated up for the first time any oils accumulated on their surface burned off. So we walked around in a haze, and daze, choking on oily smoke. We set up some exhaust fans to vent the winery, and turned on the big exhaust blower in the distillery, which helped a lot. Then we started to have some more problems with the boiler shutting down due to pressure problems, so we spent the day re-thinking the installation. Friday and Saturday were spent adding new sections of pipe for the condensate return to the boiler. Hopefully this will be the last hurdle in the boiler drama, and then we can make beer. I REALLY need a tasty brew right now!

Like usual its been a busy week. The fire grate for the copper spirits still was re-worked from square to round. I feel they overcharged me. It cost as much to re-work it as it originally cost new.

We had a few more small things to fix in the brewery. Basically, like I’ve mentioned before, everything that could be broken, or ruined through neglect, was. Sometimes it’s difficult to order parts, they may not have been made for 20 years since the equipment was new. We had to get in touch with France and England to find new valve bodies since the rubber was fried in all the ones for the brew kettle, lauter tun, and fermenting tanks. Hopefully we can get them in the next few days and fix the valves. Otherwise they need to be replaces, at a grand or two for six of them.

We did quite a bit of work on our wine. After making wine all summer it’s time to bottle most of it, so we’re getting some of it ready to bottle and bottling the rest. The new batch of dry blueberry is very nice. Dry, full bodied, spicy like a shiraz, and just a hint of oak.

I have been talking to different guys about building the stripping still, but most of them don’t have the skill or knowledge and I’m having to teach them what they will have to do. Finally I found a guy who seems to be the right one for the job. He had a background in distilling, as well as building distillery equipment, just the combination I need. We have chatted a few times on the phone, now I have to meet him and go over my plans and hear his thoughts.

The boiler guys, who have been missing in action for over two weeks finally showed up yesterday to finish the job. Of course they didn’t have all the parts they needed with them and had to go out several times to find them. Then they power up the boiler fr a test and steam starts leaking from the pipework. of course it wasn’t the majority of the pipe work that we did. It was the 5% that they did. Of course it will take us a whole day to fix their shoddy work. then the boiler kept shutting down. Our error in design or their error in work? Either way, it’s a comedy of errors… and that’s being nice when I want to be insulting. So I just bite my tongue and walk away.